Corrugated Plastic Case Factory introduces how to clean the hollow board correctly:

 
1. Cleaning of the mold part: Since the presence of grease will not only affect the transparency of the hollow plate, but also increase the cracking problem of the hollow plate, it is required to scrub the mold cavity, runners, roots of the molding holes, corners, and corners before molding. Parting surface, ejector top plate, and other parts.

 
2. The resin particles must be clean and tidy: In order to prevent the dust from attaching to the surface of the particles due to electrostatic suction, and then exposing them to the hollow board due to light refraction, it is required to pay attention to the appearance of the package before opening the package. Clean the surroundings and containers. Operators should also pay attention to their own cleaning work. For the particles that have been opened, checks should be paid attention to, and the remaining particles should be carefully packaged to create convenient conditions for reuse.

 
3. The equipment must be clean and tidy: For the hollow board box, no other resin is allowed in the hopper or barrel, or in the nozzle, otherwise it will affect its transparency or other properties. Therefore, qualified units should use special equipment for processing as much as possible, or use special barrels, screws, and nozzles. If this is not possible, they can take the disassembly and wash method or use resin for cleaning.